One of the most common tasks in every home and store is removing dresser drawers during a move, cleaning, or repair. Whether you are a home user or a furniture store operator, this skill of how to correctly remove dresser drawers will be very useful. Not only will you save your furniture from getting damaged, but you will also ensure that whenever you want to replace drawer slides, this process of removal goes smooth.
In this article, we are going to provide a clear, practical step-by-step guide to help you easily dismantle different types of drawers and some advice on choosing the right slides. We will also cover how you can improve the efficiency of your dismantling and installation with a customized slide service, especially for those businesses that purchase dresser drawer slides in bulk.
Understanding the Different Types of Drawer Slides
Before remove dresser drawers, you need to know the different types of drawer slides. Indeed, there are kinds of slides that can make the process different. It is, therefore essential to take a look at the type of drawer slides that you have. Here are a few common types of slides:
- Metal Slides: These are usually of cold rolled steel and possess a high load-carrying capacity; thus, they can be fitted on most furniture. While removing, one needs to pay attention to the fixing mechanism of the metal slides.
- Side Slides: These are mounted on either side of the drawer and are very common in older furniture. To remove them, the drawer is simply pulled out and the locking mechanism of the slide is released.
- Bottom Slides: These are the slides installed at the bottom of the drawer. Most modern furniture has these types of slides, which are less noticeable than side slides but require careful removal to avoid damaging either the slide or the drawer.
- Soft-close Slides: This type of slides provides soft closing of the drawers with minimal impact. Removing these requires making sure to release the soft-close mechanism first to avoid breakage.
Basic Steps for Dresser Drawer Removal
Next, we will demonstrate how to dismantle a drawer depending on the slide type. Here is a basic rundown of the steps necessary to remove the drawer:
Step 1: Determine Drawer Type
Check first whether it has a locking mechanism or any other mechanism for securing before taking it apart. Some have safety locks that prevent the slides from falling out too early, so you need to check first if the slides are free to move on their own.
Step 2: Drawer Removal
Most of the drawers are not difficult to remove. Sometimes you simply need to pull out the drawer gently, and it will be caught by the slides. Other slide designs require a button or undoing of some locking mechanism before the drawer is fully pulled out.
For bottom slides or soft-close slides, a bit stronger pull with simultaneously unlocking the retention mechanism is needed. In most of the slides, when one fully draws out a drawer, there is a snap or hook on the side of the slide that allows the unlocking.
Step 3: Slides Disposal
After successfully remove dresser drawers, you will have to see where exactly the slides are mounted. This may require the use of a tool to release a fixed joint between the slide and drawer. You will now have access to the slides. If still functional, they could be put to work, otherwise, get them ready for replacement.
Removal Tips Depending On the Drawer Type
Slides of different types can be removed in different ways. Here are some specific tips for removing different types of slides:
How to Remove Metal Slide Drawers
Metal slides are always firmly fixed; while removing, you need to find the locking mechanism and unlock it to smoothly pull out the drawer. If the slides are fixed with screws, you need to use a screwdriver to remove them.
How to Disassemble Side Slide Drawer
Side slides are pretty easy to remove. First, pull out the drawer and check if the clips on the slides are locked. If it is, press gently on the catch and slide the drawer out. If there’s no catch, pull the drawer out gently.
How to Remove Bottom Slide Drawers
Bottom slides are a bit more involved. Most bottom slides have to be unlocked by a fixture underneath the slide. Take them out carefully so as not to damage the slide or the bottom of the drawer.
How to Take Out Soft-Close Slide Drawers
The only difference with soft-close slides is they have an additional mechanism for closing, so extra care must be taken when removing them. First, check if there is a special unlocking mechanism; press it, then pull out the drawer. If none is found, try gently pushing any available unlock button on the slide before the removal process.
Why Choose High Quality Drawer Slides?
Choosing high quality drawer slides will not only make your drawer removal and installation smoother, but will also extend the life of your furniture. High-quality slides provide a smoother experience and reduce wear and tear on your drawers, especially after prolonged use.
For businesses that need to purchase slides in bulk, choosing the right slides is important. A customized slide solution can help you tailor your slides to your needs, ensuring that each drawer meets the specifications and improves the quality of your products.
Customized Dresser slides from Baoertai Hardware
As a professional dresser drawer slide manufacturer, we offer a variety of customization services to meet the needs of different businesses. Whether you are a home store, a furniture manufacturer or a business that needs to purchase slides in bulk, we can provide you with the right slide solution to help make your products more competitive.
